Inclusive 36-gallon reef aquarium kit boasts easy set up and maintenance to enhance your reef keeping experience. Fluval M-90 Reef Aquarium Set comes with a glass aquarium with frosted rim framing, a high-quality laminated cabinet stand, Marine & Reef High Performance LED Light*, Fluval Sea Protein Skimmer, Fluval Sea CP1 Circulation Pump, and Filter Pump to properly equip you for home reef aquarium success!

Fluval M-90 Reef Aquarium Set integrates beautifully with your home interior with its clean lines and contemporary design. Unique frosted-rim frame keeps unsightly water lines out of view while the integrated compartment conceals the bulk of the equipment. Included high-efficiency full-spectrum LED light emits essential actinic blue wavelengths for optimal coral photosynthetic activity and growth while maintaining an aesthetically pleasing viewing experience.

Fluval M-90 Reef Aquarium features a built-in drain valve with drain hose for convenient water changes. This simple valve system inside the cabinet allows you to easily change up to 20% of aquarium water volume without exposing sensitive corals to air. Elegant cabinet stand constructed from high-quality laminated wood beautifully showcases your reef aquarium display and neatly conceal all hardware within.

*35W Fluval Sea Marine & Reef Full Spectrum Performance LED Strip Light adjusts from 36"-46" in length and features 6 unique LEDs, including 400, 420, 440, 460 nm LEDs for outstanding blue spectrum coverage.

Key Features:

• Stylish reef aquarium and cabinet set
• Glass aquarium with frosted rim framing and a high-quality laminated cabinet with two-tone doors
• Integrated compartment houses a filter, Fluval Sea Protein Skimmer and Fluval Sea CP1 Circulation Pump for healthy water circulation and outstanding filtration
• Practical drain valve with drain hose for easy and convenient water changes
• Powerful day & night illumination with 3 settings: ON (day, night) and OFF switch
• All hardware is neatly concealed in the cabinet so that you can enjoy a pleasing aesthetic experience

Manufacturer recommendation for stocking levels: Allow 1 inch per body length of fish (excluding the tail) for every 1 gallon of water. Miniature fish species must be kept in shoals of at least four or five individuals.

Please specify Black or Brown & Tan Cabinet Stand Finish.

Remove all contents from the box. Before you begin, identify, count and check that you have all the parts needed for assembly.

Leakage test: Before setting up your tank, fill the aquarium with water and leave it for 48 hours in a wet room (bathroom / laundry room, etc.) in order to check for leakage. Note that the tank should not be placed directly onto the tile or concrete floor, the aquarium needs to be first be placed on top of a piece of Styrofoam, foam, carpet or similar type of material for this test.

Placing the Aquarium with its Cabinet in the Final Location
The location of the aquarium is very important. Place it away from direct sunlight. This will reduce the chances of excessive algae build-up and prevent overheating. Keep the aquarium away from heat sources such as air ducts, radiators, etc. Drafts should be avoided as well. Do not place the aquarium where water spills will cause damage.

The cabinet is specifically designed to bear the weight of a completely filled aquarium. Using a different cabinet or support may cause an unsafe condition.

The selected location should have an even and level surface. Place the aquarium and cabinet close to an electrical outlet. After placing the cabinet, use a level to ensure that it is perfectly level.

IMPORTANT: Place the aquarium tank directly on the cabinet without any additional support or damper in between. NEVER insert lining between the cabinet and aquarium.

1. Before placing the tank onto the cabinet, add plumber's tape and connect the valve at a 90° angle.
2. Insert Skimmer.
3. a. Install Pump.
   b. Install Hosing.
   c. Put the Output Nozzle through the round hole in the Filter Chamber and connect with the Joint Hose Connector. For stabilization, use the supplied Rubber Seals. Connect output Flare Nozzle.
   d. Add the Suction Strainer.
4. Install Filter Cover & position Light.